Passive Solar Greenhouse Construction
Written by on February 21, 2020
Next, I began working on the ends. First, I installed the doors and windows. I worked on one end at the time in order not to be toting setups from one end to the other since I am working alone. I then added felt over all the siding areas:
After installing the felt, a bad storm blew through and took a lot of the felt off! Oh well. Next I began installing the window, door, and corner trim boards followed by the cypress lap siding. And lastly, I installed the soffit boards BY MYSELF. I believe I nailed a board horizontally along the outside front and rear wall so that all I had to do was hold up the opposite end and start nailing. It worked quite well…..except for me smashing my finger with the hammer due to an awkward angle when the hammer glanced off a large nail and caught my finger.
Here’s a view of the other end:
